DIN EN 10025-6-2009 结构钢制热轧产品.第6部分:在淬火和回火条件下高屈服强度结构钢扁平轧材的交货技术条件(包括修改件A1-2009).英文版本DIN EN 10025-6-2009

标准号：DIN EN 10025-6-2009
中文标准名称：结构钢制热轧产品.第6部分:在淬火和回火条件下高屈服强度结构钢扁平轧材的交货技术条件(包括修改件A1-2009).英文版本DIN EN 10025-6-2009-08
英文标准名称：Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition (includes Amendment A1:2009) ; English version of DIN EN 10025-6:2009-08
标准类型：H44
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：H44
国际标准分类号：77.140.10;77.140.50
引用标准：EN 1011-2;EN 10020;EN 10025-1-2004;EN 10027-1;EN 10027-2;EN 10163-1;EN 10163-2;EN 10164;EN 10029;EN 10048;EN 10051;EN 10162;EN 10160
适用范围：Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strengthalloy special steels. The grades and qualities are given in Tables 2 to 4 (chemical composition) and Tables 5to 7 (mechanical properties) and are supplied in the quenched and tempered condition as given in 6.3.The steels specified in this document are applicable to hot-rolled flat products with a minimum nominalthickness of 3 mm and a maximum nominal thickness ≤ 150 mm for grades S460, S500, S550, S620 andS690, a maximum nominal thickness ≤ 100 mm for grade S890 and a maximum nominal thickness ≤ 50 mmfor grade S960, in steels which, after quenching and tempering, have a specified minimum yield strength of460 MPa) to 960 MPa).