DIN EN 61158-4-1-2008 工业通讯网络.现场总线规范.第4-1部分:数据联络层协议规范.1型元件.仅为CD-ROM

标准号：DIN EN 61158-4-1-2008
中文标准名称：工业通讯网络.现场总线规范.第4-1部分:数据联络层协议规范.1型元件.仅为CD-ROM
英文标准名称：Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements (IEC 61158-4-1:2007); English version EN 61158-4-1:2008, only on CD-ROM
标准类型：N18;P76
发布日期：1999/12/31 12:00:00
实施日期：2008/9/1 12:00:00
中国标准分类号：N18;P76
国际标准分类号：35.100.20;35.160;35.240.50
引用标准：IEC 61158-2;IEC 61158-3-1;ISO/IEC 7498-1;ISO/IEC 7498-3;ISO/IEC 10038-1993;ISO/IEC 10731
适用范围：1.1 GeneralThe data-link layer provides basic time-critical messaging communications between devices in anautomation environment.This protocol provides the data-link service by making use of the services available from thephysical layer. The relationship between the International Standards for fieldbus data-link service,fieldbus data-link protocol, fieldbus physical service and systems management is described inIEC/TR 61158-1.This protocol provides communication opportunities to all participating data-link entitiesa) in a cyclic asynchronous manner, sequentially to each of those data-link entities, andb) in a synchronous manner, either cyclically or acyclically, according to a pre-establishedschedule.The specified protocol also provides means of changing the set of participating data-link entities andof modifying the set of scheduled communications opportunities. When the set of scheduledcommunications opportunities is null, the distribution of communication opportunities to theparticipating data-link entities is completely asynchronous.Thus this protocol can be characterized as one which provides access asynchronously but with asynchronous overlay.1.2 SpecificationsThis standard specifiesa) procedures for the timely transfer of data and control information from one data-link user entity toa peer user entity, and among the data-link entities forming the distributed data-link serviceprovider;b) the structure of the fieldbus DLPDUs used for the transfer of data and control information by theprotocol of this standard, and their representation as physical interface data units.NOTE In IEC 61158-4-1, gray boxes have been used in the tables to indicate that the specified field is not a conceptualpart of the specific DLPDU.1.3 ProceduresThe procedures are defined in terms ofa) the interactions between peer DL-entities (DLEs) through the exchange of fieldbus DLPDUs;b) the interactions between a DL-service (DLS) provider and a DLS-user in the same systemthrough the exchange of DLS primitives;c) the interactions between a DLS-provider and a Ph-service provider in the same system throughthe exchange of Ph-service primitives.1.4 ApplicabilityThese procedures are applicable to instances of communication between systems which supporttime-critical communications services within the data-link layer of the OSI or fieldbus referencemodels and which require the ability to interconnect in an open systems interconnectionenvironment.Profiles provide a simple multi-attribute means of summarizing an implementation’s capabilities, andthus its applicability to various time-critical communications needs.1.5 ConformanceThis standard also specifies conformance requirements for systems implementing these procedures.This standard does not contain tests to demonstrate compliance with such requirements.