DIN ISO 10110-5-2008 光学和光子学.光学元件和系统的图形制备.第5部分:表面形状公差(ISO 10110-5-2007).英文版本DIN ISO 10110-5-2008
百检网 2021-07-15
标准号:DIN ISO 10110-5-2008
中文标准名称:光学和光子学.光学元件和系统的图形制备.第5部分:表面形状公差(ISO 10110-5-2007).英文版本DIN ISO 10110-5-2008
英文标准名称:Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances (ISO 10110-5:2007); English version of DIN ISO 10110-5:2008-12
标准类型:N30
发布日期:1999/12/31 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:N30
国际标准分类号:01.100.20;37.020
引用标准:ISO 7944-1998;ISO 10110-1-2006;ISO 10110-10;ISO 14999-4-2007
适用范围:ISO 10110 specifies the presentation of design and functional requirements for optical elements and systemsin technical drawings used for manufacturing and inspection.This part of ISO 10110 specifies rules for indicating the tolerance for surface form.NOTE 1 The terminology of interferometry is used for the specification of tolerances and, in particular, for the units inwhich the tolerances are to be specified; however, this does not stipulate that only interferometric methods may be usedfor the actual testing of optical parts. Other non-interferometric methods may be used if the results are converted to theunits specified here.This part of ISO 10110 applies to surfaces of both spherical and aspheric form.NOTE 2 ISO 10110-12 allows the surface form tolerance for aspheric surfaces to be specified without reference to thispart of ISO 10110.
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;