BS EN 755-8-2008 铝和铝合金.挤压的杆材/棒材、管材和型材.出水孔管的尺寸和形状公差

标准号：BS EN 755-8-2008
中文标准名称：铝和铝合金.挤压的杆材/棒材、管材和型材.出水孔管的尺寸和形状公差
英文标准名称：Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 8: Porthole tubes, tolerances on dimensions and form
标准类型：H61
发布日期：2008/4/30 12:00:00
实施日期：2008/4/30 12:00:00
中国标准分类号：H61
国际标准分类号：77.150.10
适用范围：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy extrudedporthole tubes with an outside diameter (OD) from 8 mm to 450 mm (round tube, see Figure 1) or with a crosssection contained within a circumscribing circle (CD) from 10 mm to 350 mm (other than round tube, seeFigure 2), supplied in straight lengths.This standard only applies to extruded porthole tube for general engineering applications made in thefollowing alloys: EN AW-1050A, EN AW-1200, EN AW-1350; EN AW-3003, EN AW-3103; EN AW-5005, EN AW-500**, EN AW-5049, EN AW-5051A, EN AW-5251, EN AW-5052; EN AW-6101A, EN AW-6101B, EN AW-6005, EN AW-600**, EN AW-6008, EN AW-6110A, EN AW-6012, EN AW-6014, EN AW-6018, EN AW-6351, EN AW-6060, EN AW-6360, EN AW-6061, EN AW-6261,EN AW-6262, EN AW-6262A, EN AW-6063, EN AW-6063A, EN AW-6463, EN AW-6065, EN AW-6081,EN AW-6082; EN AW-6182, EN AW-7003, EN AW-7005, EN AW-7108, EN AW-7108A, EN AW-7020.The temper designations used in this part are according to EN 515.This standard only applies to tube produced by the tube porthole/bridge method.This standard does not apply to: extruded tubes produced by the seamless, die/mandrel method (EN 755-7), tubes delivered in coils (prEN 13957), coiled tubes cut to length (prEN 13957).Figure 1 — Round tubeFigure 2 — Circumscribing circle for other than round tube