DIN ISO 8133-2008 液压传动.16MP(160bar)紧凑式系列单杆汽缸.附件的安装尺寸

标准号：DIN ISO 8133-2008
中文标准名称：液压传动.16MP(160bar)紧凑式系列单杆汽缸.附件的安装尺寸
英文标准名称：Hydraulic fluid power - Single rod cylinders, 16 MP (160 bar) compact series - Mounting dimensions for accessories (ISO 8133:2006);English version of DIN ISO 8133:2008-06
标准类型：J20
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J20
国际标准分类号：23.100.20
引用标准：ISO 286-2;ISO 3320;ISO 3322;ISO 5598;ISO 6020-2;ISO 6099
适用范围：This International Standard specifies the mounting dimensions required for interchangeability of accessoriesfor 16 MPa [160 bar 1)] compact cylinders conforming to ISO 6020-2. The accessories have been designedspecifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit theirapplication.This International Standard covers the following accessories, identified in accordance with ISO 6099:-- AP6: rod eye spherical, female thread (see Figure 1 and Table 1)-- AB5: clevis bracket, spherical eye, in angle (see Figure 2 and Table 2)-- AA7: pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3)-- AL7: locking plate for pivot pin (see Figure 4 and Table 4)-- AP2: rod clevis, female thread (see Figure 5 and Table 5)-- AP4: rod eye plain, female thread (see Figure 6 and Table 6)-- AB2: eye bracket (see Figure 7 and Table 7)-- AB4: clevis bracket, straight (see Figure 8 and Table 8)-- AA4: pivot pin, plain (cotter pin or snap ring type) (see Figure 9 and Table 9)-- AT4: trunnion bracket (see Figure 10 and Table 10)These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The designof these accessories is based on the maximum forces resulting from the specified internal diameters of thecylinders and pressures according to ISO 3320 and ISO $322.This International Standard only applies to the dimensional criteria of products manufactured in conformitywith this International Standard; it does not apply to their functional characteristics.