BS EN 60534-8-1-2005 工业过程控制阀.第8-1部分:噪声问题.空气动力流流经控制阀产生噪声的实验室测量

标准号：BS EN 60534-8-1-2005
中文标准名称：工业过程控制阀.第8-1部分:噪声问题.空气动力流流经控制阀产生噪声的实验室测量
英文标准名称：Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
标准类型：N16
发布日期：2006/2/1 12:00:00
实施日期：2006/2/1 12:00:00
中国标准分类号：N16
国际标准分类号：23.060.40
引用标准：IEC 60534-1;IEC 60534;IEC 60534-2-3;IEC 60534-8-3;IEC 61260
适用范围：This part of IEC 60534-8 defines equipment, methods, and procedures for obtaining laboratorymeasurements of sound pressure levels radiated by control valves and/or associated pipingconfigurations, including fixed restrictions, through which compressible fluids are passing.Control valves discharging to atmosphere are excluded from this standard.Method A is a uniform method of measuring the radiated noise from the valve and associatedtest piping and allows a comparison of various measuring results which is beneficial for bothuser and manufacturer. The noise criteria are expressed by determining the sound pressurelevel of the valve under consideration.Method B is a procedure for measuring the sound pressure levels within pipe systemsupstream and downstream of the valve under fixed operating conditions. Since inaccuraciesdue to the pipe transmission are eliminated, this method is preferred for evaluation of theacoustical characteristic of valves.The noise characteristics to be determined are useful for the following reasons:a) to compare the performance of different valves;b) to plan measures for noise abatement;c) to determine acoustical characteristics of valves and valve assemblies;d) to enable proper sizing of sound absorbers;e) to determine possible adverse effects on ultra-sonic flow meter measurements.