ANSI/ASTM D2287-2001 非刚性氯乙烯聚合物和共聚物模塑和挤压复合物(X-15-360)第19项(X-15-372-1)规范

标准号：ANSI/ASTM D2287-2001
中文标准名称：非刚性氯乙烯聚合物和共聚物模塑和挤压复合物(X-15-360)第19项(X-15-372-1)规范
英文标准名称：Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds (X-15-360) Item 19 (X-15-372-1) (08.02)
标准类型：G31
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G31
国际标准分类号：83.080.20
适用范围： This specification covers nonrigid vinyl chloride polymer and copolymer classes in which the resin portion of the composition contains at least 90 % vinyl chloride. The remaining 10 % may include one or more monomers copolymerized with vinyl chloride or consist of other resins mechanically blended with polyvinyl chloride or copolymers thereof. These nonrigid vinyl compounds are defined by a hardness range and include the necessary stabilizers, plasticizers, fillers, dyes, and pigments to meet the designated requirements. This specification includes nonrigid vinyl chloride compounds recommended for compression molding, injection molding, and extrusion, but it must be recognized that particular compounds may not be suitable for all these means of fabrication. Note 1-This standard is similar in content, but not technically equivalent to ISO 2898-1:1986 and ISO 2898-2:1989. The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. Recycle PVC plastics meeting the requirements of this specification may be used in some applications. Refer to the specific requirements in the Materials and Manufacture section of the applicable product standard.