DIN EN ISO 10893-10-2011 钢管无损检测.第10部分:纵向和/或横向缺陷检测用无缝和焊接(埋弧焊除外)钢管的自动全外围超声波探伤法(ISO 10893-10-2011).德文版本

标准号：DIN EN ISO 10893-10-2011
中文标准名称：钢管无损检测.第10部分:纵向和/或横向缺陷检测用无缝和焊接(埋弧焊除外)钢管的自动全外围超声波探伤法(ISO 10893-10-2011).德文版本EN ISO 10893-10-2011
英文标准名称：Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011); German v
标准类型：H26
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：H26
国际标准分类号：23.040.10;77.040.20
引用标准：ISO 5577;ISO 9712;ISO 11484
适用范围：This part of ISO 10893 specifies requirements for automated full peripheral ultrasonic shear wave (generated by conventional or phased array technique) testing of seamless and welded (except submerged arc-welded) steel tubes, for the detection of longitudinal and/or transversal imperfections. Unless otherwise specified in the purchase order, the testing method is applied for the detection of predominantly longitudinal imperfections. In the case of testing on longitudinal imperfections, Lamb wave testing may be applied at the discretion of the manufacturer. For seamless tubes, by agreement between purchaser and manufacturer, testing principles of this international standard may be applied to detect imperfections having other orientations. This part of ISO 10893 is applicable to the inspection of tubes with an outside diameter greater than or equal to 10 mm, normally with an outside diameter-to-thickness ratio greater or equal to 5.This part of ISO 10893 can also be applicable to the testing of circular hollow sections.