BS EN 15048-1-2007 非预加负荷结构的螺栓连接组件.一般要求

标准号：BS EN 15048-1-2007
中文标准名称：非预加负荷结构的螺栓连接组件.一般要求
英文标准名称：Non-preloaded structural bolting assemblies - General requirements
标准类型：J13
发布日期：2007/9/28 12:00:00
实施日期：2007/9/28 12:00:00
中国标准分类号：J13
国际标准分类号：21.060.01
引用标准：prEN 1090-2-2005;EN 1993-1-8-2005;EN 10045-1;EN 10204;EN 15048-2;EN 20898-2;EN ISO 898-1;EN ISO 3506-1;EN ISO 3506-2;EN ISO 6507-1;EN ISO 9001
适用范围：This part of this European Standard specifies the general requirements for the components of bolt/nut/washerassemblies for non-preloaded structural bolting and for the assemblies themselves. It applies to bolts (includingscrews, studs and stud bolts) and nuts made of carbon steel, alloy steel and stainless steel with the followingproperty classes: bolts made of carbon steel and alloy steel: 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 10.9; nuts made of carbon steel and alloy steel: 4, 5, 6, 8, 10, 12; bolts made of austenitic stainless steel: 50, 70, 80; nuts made of austenitic stainless steel: 50, 70, 80; if appropriate, washers according to hardness class HV 100 or HV 200.NOTE The property classes 4.8, 5.8 and 6.8 may be subjected to limitations of use, it is recommended to refer toprEN 1090-2.The standard applies to thread sizes from M12 to M36 and to the associated washers but does not preclude theuse of other sizes.Bolted connections with components according to this European Standard are able to be shear and/or tensileloaded.Bolts, nuts and washers according to this European Standard are not normally intended for welding.