BS EN 61290-10-2-2008 光学放大器.试验方法.多信道参数.选通光谱分析仪脉冲法

标准号：BS EN 61290-10-2-2008
中文标准名称：光学放大器.试验方法.多信道参数.选通光谱分析仪脉冲法
英文标准名称：Optical amplifiers – Test methods — Part 10-2: Multichannel parameters – Pulse method using a gated optical spectrum analyzer
标准类型：M33
发布日期：2009/3/31 12:00:00
实施日期：2009/3/31 12:00:00
中国标准分类号：M33
国际标准分类号：33.180.30
引用标准：IEC 61291-1-2006
适用范围：This part of IEC 61290 applies to optical fibre amplifiers (OFA) using active fibres, containingrare-earth dopants, currently commercially available.The object of this International Standard is to establish uniform requirements for accurate andreliable measurements of the signal-spontaneous noise figure as defined in IEC 61291-1.The test method independently detects amplified signal power and amplified spontaneousemission (ASE) power by launching optical pulses into the OFA under test. The ASE level ismeasured by synchronously measuring the power on an optical spectrum analyzer (OSA)during the optical pulse off period. The average optical signal level is measured by randomsampling in the OSA.