ISO 21016-2007 办公家具.桌子和写字台.稳定性、强度和耐久性测定的试验方法

标准号：ISO 21016-2007
中文标准名称：办公家具.桌子和写字台.稳定性、强度和耐久性测定的试验方法
英文标准名称：Office furniture - Tables and desks - Test methods for the determination of stability, strength and durability
标准类型：Y81
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Y81
国际标准分类号：97.140
适用范围：This International Standard specifies test methods for the determination of the stability, the strength and thedurability of all types of office tables designed for use in the seated and/or standing position, e.g. work tables,height-adjustable tables, meeting tables and desks. It applies to tables that are fully assembled and ready foruse.This International Standard does not contain test methods for storage elements, which can be found inISO 7170.The tests consist of the application, to various parts of the unit, of loads, forces and velocities simulatingnormal functional use, as well as misuse, that can reasonably be expected to occur.With the exception of the deflection of table tops, the tests are designed to evaluate properties without regardto materials, design/construction or manufacturing processes.The test results are valid only for the unit/component tested. These results can be used to represent theperformance of production models provided that the tested model is representative of the production model.Tests carried out according to this International Standard are intended to demonstrate the ability of the item togive satisfactory service in its intended environment. It is necessary to understand that such tests do notensure that structural failure will not eventually occur as a result of habitual misuse or after an excessivelylong period of service. The tests have been developed for units/components that have not been in use.However, when properly justified, they can be used for fault investigation.This International Standard specifies test methods only. It does not specify requirements. These should bespecified in a requirements document. If this is not available, suggested forces and cycles can be found inAnnex A.Assessment of ageing and degradation is not included.