ISO 1872-2-2007 塑料.聚乙烯(PE)模塑和挤塑材料.第2部分:试样制备和性能测定

标准号：ISO 1872-2-2007
中文标准名称：塑料.聚乙烯(PE)模塑和挤塑材料.第2部分:试样制备和性能测定
英文标准名称：Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
标准类型：G32
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G32
国际标准分类号：83.080.20
引用标准：ISO 62;ISO 75-2;ISO 178;ISO 179-1;ISO 179-2
适用范围：This part of ISO 1872 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyethylene (PE) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given. Properties and test methods that are suitable and necessary to characterize PE moulding and extrusion materials are listed.The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for or of particular significance to these moulding and extrusion materials are also included in this part of ISO 1872, as are the designatory properties specified in ISO 1872-1.In order to obtain reproducible and comparable test results, it is necessary to use the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.