ISO 9652-2-2000 砌体工程 第2部分:用单一规则进行无增强砖石工程设计

标准号：ISO 9652-2-2000
中文标准名称：砌体工程 第2部分:用单一规则进行无增强砖石工程设计
英文标准名称：Masonry - Part 2: Unreinforced masonry design by simple rules
标准类型：P24
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：P24
国际标准分类号：91.080.30
适用范围：This part of ISO 9652 gives limited rules for the structural design and construction of unreinforced masonry for which calculations of loading and strength criteria are not required. This part of ISO 9652 is applicable to masonry built with Group 1, 2, or 3 masonry units [see 5.2.1 of ISO 9652-1:—] of clay, calcium silicate, concrete (including autoclaved aerated concrete), and manufactured stone units. The field of application is defined in Table 1 and is subject to the limitations of normative annex A. NOTE Clauses 5, 6, 7 and 8 should be taken together; clauses 9 and 10 may be applied separately; clause 11 applies to all walls covered by this part of ISO 9652. For masonry designed by calculation, see ISO 9652-1. The following are not covered by this part of ISO 9652: a) foundations as shown in Figure 1; b) free-standing walls; c) retaining walls other than basement walls; d) basement walls subjected to hydrostatic pressure; e) masonry in seismic areas with expected ground accelerations in excess of 1,0 m/s