BS ISO 5414-1-2002 扁方筒形柄刀具用的带卡箍螺钉的刀具卡盘(立铣刀刀具卡盘架).第1部分:刀柄传动系统的尺寸

标准号：BS ISO 5414-1-2002
中文标准名称：扁方筒形柄刀具用的带卡箍螺钉的刀具卡盘(立铣刀刀具卡盘架).第1部分:刀柄传动系统的尺寸
英文标准名称：Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Dimensions of the driving system of tool shanks
标准类型：J51
发布日期：2002/11/19 12:00:00
实施日期：2002/11/19 12:00:00
中国标准分类号：J51
国际标准分类号：25.060.20
适用范围：This part of ISO 5414 lays down the dimensions of tool chucks (end mill holders) with clamp screws designed for driving flatted cylindrical shanks in accordance with ISO 3338-2 and specifies the clamp screws used. It also gives the maximum diameter of the chuck nose. This part of ISO 5414 defines two types of drive: — chucks with bores of d1 ≤ 20 mm intended for driving cylindrical shank tools with a single flat, these tools being provided with either a single or a double cutting part; — chucks with bores of d1 ≥ 25 mm intended for driving cylindrical shank tools with a double flat, these tools being provided with a single cutting part only. NOTE The connecting dimensions of the various types of chucks and the designation of tool chucks (end mill holders) with clamp screws are dealt with in ISO 5414-2.