BS EN 50156-1-2005 炉用电气设备和辅助设备.应用设计和安装要求

标准号：BS EN 50156-1-2005
中文标准名称：炉用电气设备和辅助设备.应用设计和安装要求
英文标准名称：Electrical equipment for furnaces and ancillary equipment - Requirements for application design and installation
标准类型：K61
发布日期：2005/1/20 12:00:00
实施日期：2005/1/20 12:00:00
中国标准分类号：K61
国际标准分类号：27.060.01
适用范围：This standard applies to the application design and installation of electrical equipment, control circuits andprotective systems for furnaces which are operated with solid, liquid or gaseous fuels and their ancillaryequipment. It specifies requirements to meet the operating conditions of furnaces, to reduce the hazards ofcombustion and to protect the heated systems from damage e.g. by overheating.Such furnaces and the electrical equipment may be part of the following plants for example:a) Water heating systemsb) Steam boiler installations (steam and hot-water boilers) and heat recovery steam boilersNOTE 1 The requirements of this standard apply according to the electrical equipment of electrically heated steamboilers.NOTE 2 Seagoing vessels and offshore facilities are governed by International Maritime Law and as such are not withinthe scope of this standard. These requirements may be used for such facilities.c) Warm air heatersd) Hot-gas heaterse) Heat exchanger systemsf) Combustion chambers of stationary turbinesg) As long as no other standard is applicable for combined heat and power stations it is recommended touse the requirements of this standardh) This standard may also be used as reference for electrical equipment requirements for thermoprocessingequipment.NOTE 3 The requirements of this standard are applicable in all cases where an equipment specific standard does notspecify a requirement.The requirements in this standard are not applicable to electrical equipment for:i) Non electrically heated appliances and burner control systems for household and similar purpose;j) Furnaces using technologies for the direct conversion of heat into electrical energy;k) Combustion chambers of non-stationary prime movers and turbines;l) Central oil supply systems for individual heating appliances;m) Furnaces using solid fuels for heating purposes for household use with a nominal thermal output up to1 MW;n) Furnaces which are used to heat process fluids and gasses in chemical plant.This standard may be used as a basis for the requirements placed on electrical equipment for furnaces whichare excluded from its field of application.