IEC 62329-3-101-2010 热缩模具形状.第3部分:形状尺寸、材料要求和兼容性性能的要求规范.活页101:聚烯烃半刚性的热缩模具形状的有限火患、材料要求和系统性能

标准号：IEC 62329-3-101-2010
中文标准名称：热缩模具形状.第3部分:形状尺寸、材料要求和兼容性性能的要求规范.活页101:聚烯烃半刚性的热缩模具形状的有限火患、材料要求和系统性能
英文标准名称：Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements a
标准类型：J46
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J46
国际标准分类号：29.035.01;29.035.20
引用标准：IEC 60695-11-10;IEC 62329-1;IEC 62329-2-2006;IEC 62329-3-100-2010;IEC 60757-1983;ISO 1817- 2005
适用范围：This sheet of IEC 62329-3 gives the requirements for heat-shrinkable moulded shapes, polyolefin,semi-rigid, limited fire hazard, material requirements and system performance.Experience of product performance indicates that this moulded shape material is suitable forinclusion in systems for operation in the following temperature range: –30 °C to + 105 °C.The moulded shapes may be supplied with a pre-coated adhesive. Refer to themanufacturers/suppliers for options. A guide to adhesive compatibility is given in Annex A.These moulded shapes are normally supplied in the styles and dimensions given in IEC 62329-3-100. The colour is normally black.Styles and dimensions other than those specifically listed in IEC 62329-3-100 may be available ascustom items. These items shall be considered to comply with this standard if they comply with theproperty requirements listed in Table 1 with the exception of dimensions.Materials that conform to this specification meet established levels of performance. However, theselection of a material by a user for a specific application should be based on the actualrequirements necessary for adequate performance in that application and not based on thisspecification alone.