DIN EN ISO 8501-4-2007 涂料和有关产品涂覆之前钢基片的制备.表面清洁度的目视评估.第4部分:与高压水冲法有关的初始表面条件、制备等级和闪锈等级

标准号：DIN EN ISO 8501-4-2007
中文标准名称：涂料和有关产品涂覆之前钢基片的制备.表面清洁度的目视评估.第4部分:与高压水冲法有关的初始表面条件、制备等级和闪锈等级
英文标准名称：Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting (ISO
标准类型：A29
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：A29
国际标准分类号：25.220.10
引用标准：ISO 4628-3;ISO 8501-1
适用范围：This part of ISO 8501 specifies a series of preparation grades for steel surfaces after removal/partial removal of water-soluble contaminants, rust, previous paint coatings and foreign matter by high-pressure water jetting. The various grades are defined by written descriptions together with photographs that are representative examples within the tolerances for each grade as described in words. In addition, this part of ISO 8501 specifies both initial surface conditions and after-cleaning flash rust grades, also defined by written descriptions together with representative photographic examples.NOTE 1 Examples of foreign matter are salt, grime, dirt, mill scale, oil, grease and marine growth, e.g. algae.This part of ISO 8501 relates the cleanliness of the surface to its visual appearance. In many instances, this is sufficient for the purpose but, for coatings likely to be exposed to severe environments, such as water immersion and continuous condensation conditions, consideration should be given to testing for soluble salts and other invisible contaminants on the visually clean surface by the physical and chemical methods which form the subjects of the various parts of ISO 8502.The roughness characteristics of the surface should also be considered by reference to ISO 8503, although it must be noted that preparation by high-pressure water jetting does not create a profile or significantly change an existing profile.NOTE 2 Water pressure, water volume, nozzle design, stand-off distance and traverse rate are factors which will affect the efficiency of removal of contaminants such as water-soluble matter, rust and paint coatings. The removal efficiency also depends on whether detergents are being used in the cleaning process. If so, rinsing afterwards with clean water is necessary.