BS EN 60317-0-5-2007 绕组线的特殊类型用规范.一般要求.玻璃纤维编制树脂或浸渍清漆的裸露或涂瓷釉的矩形铜线

标准号：BS EN 60317-0-5-2007
中文标准名称：绕组线的特殊类型用规范.一般要求.玻璃纤维编制树脂或浸渍清漆的裸露或涂瓷釉的矩形铜线
英文标准名称：Specifications for particular types of winding wires - General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
标准类型：K12
发布日期：2007/2/28 12:00:00
实施日期：2007/2/28 12:00:00
中国标准分类号：K12
国际标准分类号：29.060.10
适用范围：This part of IEC 60317 specifies general requirements of glass-fibre braided resin or varnishimpregnated, bare or enamelled rectangular copper wire.The range of nominal conductor dimensions is given in the relevant specification sheet.When reference is made to a winding wire according to IEC 60317-39 or IEC 60317-40mentioned under Clause 2, the following information is given in the description:– reference to IEC specification;– nominal conductor dimensions in millimetres (width × thickness);– grade of coating and glass covering.The coating shall be characterised by the following grades of thickness:- BGL1, bare conductor with 1 braided layer of glass fibre- BGL2, bare conductor with 2 braided layers of glass fibre- grade 1 BGL1, enamelled grade 1 (grade 1) with 1 braided layer of glass fibre (BGL1)- grade 1 BGL2, enamelled grade 1 (grade 1) with 2 braided layers of glass fibre (BGL2)- grade 2 BGL1, enamelled grade 2 (grade 2) with 1 braided layer of glass fibre (BGL1)- grade 2 BGL2, enamelled grade 2 (grade 2) with 2 braided layers of glass fibre (BGL2)