ISO 12086-2-2006 塑料.含氟聚合物分散体模塑和挤塑材料.第2部分:试样的制备和性能的测定

标准号：ISO 12086-2-2006
中文标准名称：塑料.含氟聚合物分散体模塑和挤塑材料.第2部分:试样的制备和性能的测定
英文标准名称：Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
标准类型：G31
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G31
国际标准分类号：83.080.20
适用范围：1.1 This part of ISO 12086 describes the preparation of test specimens and provides test methods to definecharacteristics of thermoplastic fluoropolymer resins. Results from the testing may be used as the basis fordesignation, material specifications or both. This part of ISO 12086 describes the conditions of test fordetermining both designatory and other properties of the homopolymers and various copolymers offluoromonomers, as dispersions or powders for moulding, extrusion and other uses. The test proceduresincluded are appropriate for, but are not restricted to, the fluoropolymers listed in Clause 4 and for whichdesignatory properties are specified in ISO 12086-1.1.2 The properties of semi-finished and finished products made from fluoropolymer resins depend on thematerial used, the shape of the product, the physical and morphological state of the material resulting from theprocessing operations, and on the test conditions. Therefore, to obtain reproducible test results, the definedmethods of preparation of test specimens and defined test conditions given in this part of ISO 12086 must beapplied.1.3 Agreements between vendor and purchaser should preferably be based on properties measured usingthe specimens and test conditions described in this part of ISO 12086.