IEC 60309-1 Edition 4.1-2005 工业用插头、插座和耦合器.第1部分:一般要求

标准号：IEC 60309-1 Edition 4.1-2005
中文标准名称：工业用插头、插座和耦合器.第1部分:一般要求
英文标准名称：Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
标准类型：K30
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：K30
国际标准分类号：29.120.30;29.120.39
引用标准：IEC 60112-1979;IEC 60050-441-1984;IEC 60083-1997;IEC 60227;IEC 60228-1978
适用范围：This standard applies to plugs and socket-outlets, cable couplers and appliance couplers, with a rated operating voltage not exceeding 690 V d.c. or a.c. and 500 Hz a.c, and a rated current not exceeding 250 A, primarily intended for industrial use, either indoors or outdoors.The list of preferred ratings is not intended to exclude other ratings.This standard applies to plugs and socket-outlets, cable couplers and appliance couplers, hereinafter referred to as accessories, for use when the ambient temperature is normally within the range of -25 °C to +40 °C. These accessories are intended to be connected to cables of copper or copper alloy only.This standard applies to accessories with screwless type terminals or insulation piercing terminals, with a rated current up to and including. 16 A for Series I and 20 A for Series II.The use of these accessories on building sites and for agricultural, commercial and domestic applications is not precluded.Socket-outlets or appliance inlets incorporated in or fixed to electrical equipment are within the scope of this standard. This standard also applies to accessories intended to be used in extra-low voltage installations.This standard does not apply to accessories primarily intended for domestic and similar general purposes.In locations where special conditions prevail, for example on board ship or where explosions are liable to occur, additional requirements may be necessary.