BS EN 186290-1998 电子元器件质量评定协调体系.光纤和电缆连接件.MPO型

标准号：BS EN 186290-1998
中文标准名称：电子元器件质量评定协调体系.光纤和电缆连接件.MPO型
英文标准名称：Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO
标准类型：M33
发布日期：1998/2/15 12:00:00
实施日期：1998/2/15 12:00:00
中国标准分类号：M33
国际标准分类号：33.180.20
适用范围：This specification covers Type MPO fibre optic connector sets. Type MPO defines a multiway connector characterised by a rectangular ferrule nominally 6,4 mm × 2,5 mm which utilises two pins of 0,7 mm diameter as its alignment technology . It is applicable to a joint of multiple fibres by arranging them between two pin-positioning holes in the plug. The connector includes a push-pull coupling mechanism and a ferrule spring loaded in the direction of the optical axis. The connector has a single male key which may be used to orientate and limit the relative position between the connector and the component to which it is mated. The specification contains the requirements for Type MPO connector sets. Detail specifications shall be prepared using the following proforma general blank detail specifications associated with the generic specification. For example:- Environmental Category Ⅱ EN 186 002 When completed, the detail specifications (DSs) applicable to this sectional specification (SS) shall be re-numbered in accordance with CECC 00 700 (Section Ⅳ) Issue 1, clause 4.2, as follows:- CECC 86 292-XXX Type MPO Environmental Category Ⅱ