BS EN 61000-4-16-1998+A2-2011 电磁兼容性(EMC).试验和测量技术.频率范围0 Hz至150 kHz的传导共模干扰抗扰性试验

标准号：BS EN 61000-4-16-1998+A2-2011
中文标准名称：电磁兼容性(EMC).试验和测量技术.频率范围0 Hz至150 kHz的传导共模干扰抗扰性试验
英文标准名称：Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
标准类型：L06
发布日期：1998/5/15 12:00:00
实施日期：1998/5/15 12:00:00
中国标准分类号：L06
国际标准分类号：33.100.20
引用标准：IEC 60050(161);IEC 60068-1
适用范围：This part of IEC 61000 relates to the immunity requirements and test methods for electrical andelectronic equipment to conducted, common mode disturbances in the range d.c. to 150 kHz.The object of this standard is to establish a common and reproducible basis for testingelectrical and electronic equipment with the application of common mode disturbances topower supply, control, signal and communication ports.This standard defines– test voltage and current waveform;– range of test levels;– test equipment;– test set-up;– test procedures.For some types of ports, for example ports intended to be used with highly balanced lines,additional test provisions may be established by product committee specifications.The test is intended to demonstrate the immunity of electrical and electronic equipment whensubjected to conducted, common mode disturbances such as those originating from power linecurrents and return leakage currents in the earthing/grounding system.The disturbances produced by 400 Hz mains systems are not included in the scope of thisstandard.Actual interference due to these disturbance phenomena is relatively rare, except in industrialplants. Product Committees should therefore consider whether there is a justification forapplying this standard in their Product/Product Family standards (see also clause 3).This test is not relevant for equipment ports intended to be connected to short cables, having alength less than 20 m or less.The immunity to harmonics and interharmonics, including mains signalling, on a.c. powerports (in differential mode) is not included in the scope of this standard and is covered byIEC 61000-4-13.The immunity to conducted disturbances generated by intentional radio-frequency transmittersis not included in the scope of this standard and is covered by IEC 61000-4-6.