IEC 60099-5-2018 避雷器.第5部分:选择和应用建议

标准号：IEC 60099-5-2018
中文标准名称：避雷器.第5部分:选择和应用建议
英文标准名称：Surge arresters - Part 5: Selection and application recommendations
标准类型：K49
发布日期：1999/12/29 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：K49
国际标准分类号：29.120.50;29.240.10
引用标准：IEC 60071-1-2006;IEC 60071-1 AMD 1-2010;IEC 60071-2-1996;IEC/TR 60071-4-2004;IEC 60099-4-2014;IEC 60099-6-2002;IEC 60099-8-2011;IEC 60507-2013;IEC/TS 60815-1-2008;IEC 62271-200-2011;IEC 62271-203-2011
适用范围：This part of IEC 60099 provides information, guidance, and recommendations for the selection and application of surge arresters to be used in three-phase systems with nominal voltages above 1 kV. It applies to gapless metal-oxide surge arresters as defined in IEC 60099-4, to surge arresters containing both series and parallel gapped structure - rated 52 kV and less as defined in IEC 60099-6 and metal-oxide surge arresters with external series gap for overhead transmission and distribution lines (EGLA) as defined in IEC 60099-8. In Annex J, some aspects regarding the old type of SiC gapped arresters are discussed. Surge arrester residual voltage is a major parameter to which most users have paid a lot of attention to when selecting the type and rating. Typical maximum residual voltages are given in Annex F. It is likely, however, that for some systems, or in some countries, the requirements on system reliability and design are sufficiently uniform, so that the recommendations of the present standard may lead to the definition of narrow ranges of arresters. The user of surge arresters will, in that case, not be required to apply the whole process introduced here to any new installation and the selection of characteristics resulting from prior practice may be continued. Annexes H and I present comparisons and calculations between old line discharge classification and new charge classification.