SAE J 2337/1-2014 有ISO 261标准螺纹和O形密封圈的流体动力和高压用端口,螺杆端和堵头的连接.第1部分:有槽锥形座端口的要求,尺寸规格,设计和试验方法

标准号：SAE J 2337/1-2014
中文标准名称：有ISO 261标准螺纹和O形密封圈的流体动力和高压用端口,螺杆端和堵头的连接.第1部分:有槽锥形座端口的要求,尺寸规格,设计和试验方法
英文标准名称：Connections for Fluid Power and High Pressure Use-Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing-Part 1: Ports with Recessed Conical Seat Requirements, Dimensions, Design, and Test Methods
标准类型：T32
发布日期：2014/6/5 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T32
国际标准分类号：23.040.01
引用标准：ASME B46.1-2009;ASTM B 117-2011;ASTM B 633-2013;ISO 261-1998;ISO 1302-2002;ISO 3448-1992;ISO 4759-1-2000;ISO 5598-2008;ISO 19879-2010;SAE J 515-2010;SAE J 2337/2-2012;SAE J 2337/3-2012
适用范围：This part of SAE J2337 specifies dimensions, design, and performance requirements for eight ports using a conical seal to insure leak proof performance with a design factor of 4 to 1. Field of Application These connectors are intended for general and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These connectors are capable of providing leak proof full flow connections in hydraulic systems operating from 95 kPa vacuum to the working pressures shown in Table 1. Since many factors influence the pressure at which hydraulic systems will or will