BS EN 13785-2005+A1-2008 容量高达(含)100千克/小时,最大标称出口压力高达(含)4 bar的调节器,EN 12864标准所含部分及其丁烷,丙烷或其混合物相关安全装置除外

标准号：BS EN 13785-2005+A1-2008
中文标准名称：容量高达(含)100千克/小时,*大标称出口压力高达(含)4 bar的调节器,EN 12864标准所含部分及其丁烷,丙烷或其混合物相关安全装置除外
英文标准名称：Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
标准类型：J16
发布日期：2005/3/30 12:00:00
实施日期：2005/3/30 12:00:00
中国标准分类号：J16
国际标准分类号：23.060.40
引用标准：EN 437-2003;EN 549;EN 12164;EN 12165;EN 60695-11-10;EN ISO 75;EN ISO 178;EN ISO 180;EN ISO 228-1;EN ISO 527;EN ISO 3166-1;EN ISO 4892-3;EN ISO 8434-1;ISO 7-1;ISO 301;ISO 565;ISO 7005-2;ISO 9227
适用范围：This document defines the constructional and operational characteristics, the safety requirements, testmethods and the marking of regulators having a capacity of less than or equal to 100 kg/h, other than theregulators covered by EN 12864, for butane, propane or their mixtures, in the gaseous phase.Regulators for caravans up to 1,5 kg/h are covered by EN 12864.NOTE 1 bar = 105 Pa.This document also applies to the safety devices which are included within regulators covered by thisdocument. The characteristics of these devices are given in annexes A and B.The requirements apply generally to regulators used in locations where the temperature likely to be reachedduring use is between -20 °C and +50 °C. When the regulators are used at temperatures below -20 °C it isessential that they comply with special requirements which are defined in annex C.This document does not include the installation rules for regulators. Reference should be made to nationalregulations in force in the member countries.This document only covers type testing.WARNING NOTICE: The figures in annexes G and H show the types of connections used according to the country of useof the regulators.The top part of these figures (above the horizontal line) applies to the regulator and is normative.The bottom part of these figures (below the horizontal line) applies to the part to be connected to the regulator. This isgiven as a guide for the tests and is not normative.