BS EN ISO 28927-4-2010 手持便携式电动工具.振动辐射的评估试验方法.直向砂轮机

标准号：BS EN ISO 28927-4-2010
中文标准名称：手持便携式电动工具.振动辐射的评估试验方法.直向砂轮机
英文标准名称：Hand-held portable power tools. Test methods for evaluation of vibration emission. Straight grinders
标准类型：K64
发布日期：2011/2/28 12:00:00
实施日期：2011/2/28 12:00:00
中国标准分类号：K64
国际标准分类号：13.160;25.140.01
引用标准：ISO 603-12-1999;ISO 2787-1984;ISO 4026-2003;ISO 4027-2003;ISO 4029-2003;ISO 5349-1-2001;ISO 5349-2-2001;ISO 5391-2003;ISO 17066-2007;ISO 20643-2005;EN 755-2-2008;EN 12096-1997
适用范围：This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at thehandles of straight grinders. It is a type-test procedure for establishing the magnitude of vibration in thegripping areas of a machine fitted with a specified test wheel and run under no-load conditions.This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by othermeans, intended for grinding and surface finishing using straight grinding wheels type 1, tapered wheels type4 and cylindrical plugs, e.g. of type 16 (cylindrical plug, tapered cone), 18 (cylindrical plug, flat end), 18R(cylindrical plug, rounded end) and 19 (cylindrical plug, taper-roll shaped), for use on all kinds of materials. It isnot applicable to grinders used with wire brushes, nor is it applicable to die grinders where the inserted tool ismounted in a collet.NOTE 1 Typical machines covered by this part of ISO 28927 are illustrated in Figures 1 to 3.It is intended that the results be used to compare different models of the same type of machine.NOTE 2 To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.