DIN EN 14792-2006 固定源排放.测定氮氧化物(NO

标准号：DIN EN 14792-2006
中文标准名称：固定源排放.测定氮氧化物(NO
英文标准名称：Stationary source emissions - Determination of mass concentration of nitrogen oxides (NO
标准类型：Z60
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Z60
国际标准分类号：13.040.40
引用标准：ENV 13005;EN 14790-2005;EN ISO 14956;CEN/TS 14793
适用范围：This European Standard describes the chemiluminescence method, including the sampling and the gasconditioning system, to determine the NO/NO2/NO,. concentrations in flue gases emitted from ducts andstacks to atmosphere. This European Standard is the Standard Reference Method (SRM) for periodicmonitoring and for calibration or control of Automatic Measuring Systems (AMS) permanently installed on astack, for regulatory or other purposes such as calibration. To be used as the SRM, the user shalldemonstrate that the performance characteristics of the method are better than the performance criteriadefined in this European Standard and that the overall uncertainty of the method is less than + 10 % relative atthe daily Emission Limit Value (ELV).NOTE When the chemiluminescence method is the measurement principle used for AMS, reference should be madeto EN 14181 and other relevant standards provided by CEN TC 264.An Alternative Method to this SRM may be used provided that the user can demonstrate equivalenceaccording to the Technical Specification CEN TS 14793, to the satisfaction of his national accreditation bodyor law.This SRM has been evaluated during field tests on waste incineration, co-incineration and large combustioninstallations. It has been validated for sampling periods of 30 min in the range of 0 mg NO2/m3 to1 300 mg NO2/m3 for large combustion plants and 0 mg NO2/m3 to 400 mg NO2/m3 for waste incineration,according to emission limit values (ELVs) laid down in the following Council Directives:-- Council Directive 2001/80/EC on the limitation of emissions of certain pollutants into the air from large combustion plants;-- Council Directive 2000/76/EC on waste incineration plants.The ELVs for NOx (NO + NO2) in EU directives are expressed in mg NO2/m3, on dry basis, at a referencevalue for 02 and at the reference conditions (273 K and 101,3 kPa).