DIN EN 10028-5-2009 承压钢扁平轧材.第5部分:热机轧制的可焊接细粒钢.英文版本EN 10028-5-2009

标准号：DIN EN 10028-5-2009
中文标准名称：承压钢扁平轧材.第5部分:热机轧制的可焊接细粒钢.英文版本EN 10028-5-2009
英文标准名称：Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; English version of DIN EN 10028-5:2009-09
标准类型：H46
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：H46
国际标准分类号：77.140.30;77.140.50
引用标准：EN 10204-2004;EN 10028-1-2007+A1-2009
适用范围： This European Standard specifies the requirements for flat products for pressure equipments made of thermomechanically rolled steels as specified in Table 1.The steels are not suitable for hot forming.NOTE 1 At the time of publication of this European Standard, no sufficient data for the standardization of the elevatedtemperature properties of these steels was available. If their use at such temperatures is intended the conditions for this shouldbe specially agreed between the interested parties.The requirements of EN 10028-1:2007 + A1:2009 also apply.NOTE 2 Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption ofconformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in thisEuropean Standard (Part 1 and this Part 5 of the series) and does not presume adequacy of the material to a specific item ofequipment. Consequently, the assessment of the technical data stated in this material standard against the design requirementsof this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.