BS EN 61158-4-7-2008 工业通讯网络.现场总线规范.数据链路层协议规范.7型元件

标准号：BS EN 61158-4-7-2008
中文标准名称：工业通讯网络.现场总线规范.数据链路层协议规范.7型元件
英文标准名称：Industrial communication networks — Fieldbus specifications — Part 4-7: Data-link layer protocol specification — Type 7 elements
标准类型：N17
发布日期：2008/5/30 12:00:00
实施日期：2008/5/30 12:00:00
中国标准分类号：N17
国际标准分类号：35.100.20;35.160;35.240.50
引用标准：IEC 61158-2 Ed.4.0;IEC 61158-3-7;ISO/IEC 7498-1;ISO/IEC 7498-3;ISO/IEC 10731
适用范围：1.1 GeneralThe data-link layer provides basic time-critical messaging communications between devices inan automation environment.This protocol provides communication opportunities to all participating data-link entitiesa) in a synchronously-starting cyclic manner, according to a pre-established schedule, andb) in a cyclic or acyclic asynchronous manner, as requested each cycle by each of thosedata-link entities.Thus this protocol can be characterized as one which provides cyclic and acyclic accessasynchronously but with a synchronous restart of each cycle.1.2 SpecificationsThis standard specifiesa) procedures for the timely transfer of data and control information from one data-link userentity to a peer user entity, and among the data-link entities forming the distributed datalinkservice provider;b) the structure of the fieldbus DLPDUs used for the transfer of data and control informationby the protocol of this standard, and their representation as physical interface data units.1.3 ProceduresThe procedures are defined in terms ofa) the interactions between peer DL-entities (DLEs) through the exchange of fieldbusDLPDUs;b) the interactions between a DL-service (DLS) provider and a DLS-user in the same systemthrough the exchange of DLS primitives;c) the interactions between a DLS-provider and a Ph-service provider in the same systemthrough the exchange of Ph-service primitives.1.4 ApplicabilityThese procedures are applicable to instances of communication between systems whichsupport time-critical communications services within the data-link layer of the OSI or fieldbusreference models, and which require the ability to interconnect in an open systemsinterconnection environment.Profiles provide a simple multi-attribute means of summarizing an implementation’scapabilities, and thus its applicability to various time-critical communications needs.1.5 ConformanceThis standard also specifies conformance requirements for systems implementing theseprocedures. This part of this standard does not contain tests to demonstrate compliance withsuch requirements.