BS EN 10226-2-2005 螺纹上压力强密联接的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸、公差及名称和符号

标准号：BS EN 10226-2-2005
中文标准名称：螺纹上压力强密联接的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸、公差及名称和符号
英文标准名称：Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
标准类型：J13
发布日期：2006/1/16 12:00:00
实施日期：2006/1/16 12:00:00
中国标准分类号：J13
国际标准分类号：21.040.30
引用标准：EN 10226-3
适用范围：This European Standard specifies the requirements for thread form, dimensions, tolerances and designation for jointing pipe threads, sizes 1/16 to 6 inclusive, for joints made pressure-tight by the mating of the threads. These threads are taper external and taper internal and are intended for use with pipes suitable for threading and for valves, fittings or other pipeline equipment interconnected by threaded joints.An appropriate thread sealant or jointing compound should be used on the thread to ensure pressure-tight joints.NOTE 1 Threaded joints using taper external threads and parallel internal threads are detailed in EN 10226-1.NOTE 2 The requirements for taper external threads are identical in EN 10226-1 and EN 10226-2.NOTE 3 For pipe threads where pressure-tight joints are not made on the threads see EN ISO 228-1.NOTE 4 EN 10226-3 gives details of recommended gauging systems for the verification of thread dimensions and threadform.