DIN EN 13958-2009 铝及铝合金.通用冷拉制圆盘管.规范

标准号：DIN EN 13958-2009
中文标准名称：铝及铝合金.通用冷拉制圆盘管.规范
英文标准名称：Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification; German version EN 13958:2008
标准类型：H61
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：H61
国际标准分类号：77.150.10
引用标准：EN 515;EN 573-3;EN 754-2;EN 12258-1-1998
适用范围：This European Standard specifies the tolerances on dimensions and form of round aluminium and aluminiumalloys porthole extruded and cold drawn tubes with an outside diameter (OD) of over 2 mm up to and including50 mm supplied in coil form or in straight lengths cut from coiled material: see Figure 1.This European Standard mainly applies to round cold drawn tube for general engineering applicationsmanufactured in lxxx series of aluminium and 3xxx series of alloys. The use of this European Standard fornon-standardised lxxx aluminium and 3xxx alloys or alloys from other series, e.g. 5xxx or 6xxx, is subject toagreement between supplier and purchaser.This European Standard only applies to:-- round tube extruded by the porthole/bridge method in coil form and then cold drawn to the final dimensions required;-- tube as above but delivered in straight lengths cut from coiled material.This European Standard does not apply to:-- seamless extruded (die/mandrel method) and drawn tubes (EN 754-7);-- tubes extruded in straight lengths (i.e. not coiled) and drawn (EN 754-8).