SAE AMS 4310E-2008 5.6Zn 2.5Mg 1.6Cu 0.23Cr(7075-T651、7075-T652)溶解热处理,机械应力释放和沉淀热处理的铝合金轧制或锻制环材

标准号：SAE AMS 4310E-2008
中文标准名称：5.6Zn 2.5Mg 1.6Cu 0.23Cr(7075-T651、7075-T652)溶解热处理,机械应力释放和沉淀热处理的铝合金轧制或锻制环材
英文标准名称：Aluminum Alloy, Rolled or Forged Rings, 5.6Zn-2.5Mg-1.6Cu-0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
标准类型：V11
发布日期：2008/7/16 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：V11
国际标准分类号：49.025.20
引用标准：SAE AMS 2355;SAE AMS 2772;SAE AMS 2808;SAE ARP 823;ASTM B 594;ASTM B 660
适用范围：1.1 FormThis specification covers an aluminum alloy in the form of rolled or forged rings.1.2 ApplicationThese rings have been used typically for high strength machined parts where good stability is required during machining,but usage is not limited to such applications. These rings are not recommended for fusion welding.1.2.1 Certain design and fabricating procedures may cause these rings to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.1.3 ClassificationRings are classified by type of mechanical stress relief as follows:7075-T651 Stress relieved by tension7075-T652 Stress relieved by compression1.3.1 Either type may be supplied, unless a specific type is ordered.