ISO 22915-10-2008 工业卡车.稳定性的验证.第10部分:由动力装置侧移载荷堆垛的特殊条件下运行的卡车用附加稳定性试验

标准号：ISO 22915-10-2008
中文标准名称：工业卡车.稳定性的验证.第10部分:由动力装置侧移载荷堆垛的特殊条件下运行的卡车用附加稳定性试验
英文标准名称：Industrial trucks - Verification of stability - Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
标准类型：J83
发布日期：2008/6/15 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J83
国际标准分类号：53.060
引用标准：ISO 3691-1;ISO 5053;ISO 22915-1;ISO 22915-2;ISO 22915-3;ISO 22915-4;ISO 22915-7
适用范围：ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and theverification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled orpedestrian-propelled vehicles, excepting those running on rails. They are either operator-controlled ordriverless and designed to carry, tow, push, lift, stack or tier in racks.This part of ISO 22915 specifies an additional test for verifying the stability of a laden truck fitted with apowered load-handling device, such as a sideshift, which can displace the centre of gravity to a substantial,predetermined extent from the longitudinal centre plane of the truck. Such devices are used in that mode fordepositing and retrieving a load with the mast vertical or raised to maximum boom angle and extension.A displacement is considered to be a substantial displacement if it is more than-- 100 mm, for a truck with a rated capacity < 5 000 kg, 150 mm, for a truck with a rated capacity ≥ 5 000 kg and ≤ 10 000 kg,-- 250 mm, for a truck with a rated capacity > 10 000 kg and < 20 000 kg, 350 mm, for a truck with a rated capacity ≥ 20 000 kg.