SAE J 1603-2008 液压盘式制动器汽缸的橡胶密封件

标准号：SAE J 1603-2008
中文标准名称：液压盘式制动器汽缸的橡胶密封件
英文标准名称：Rubber Seals for Hydraulic Disc Brake Cylinders
标准类型：T33
发布日期：2008/5/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T33
国际标准分类号：23.100.20;43.040.40;83.060
引用标准：SAE J1703;SAE J 1704;ASTM D 573
适用范围：This SAE Standard describes the performance and part requirements for elastomeric seals used in highway vehicle disc brake calipers. Seals covered by this specification may be the solid section type (square, rectangular, O-ring, etc.) mounted stationary in the cylinder bore or on the movable piston. The specification contains the following major sections:a. Resistance to Fluid at Elevated Temperature—Physical Stability [loose parts in 120 °C ± 2 °C (248 °F ± 3.6 °F) brake fluid for 70 h]b. Resistance to Fluid at Elevated Temperature—Precipitation Characteristics [loose parts in 120 °C ± 2 °C (248 °F ± 3.6 °F) brake fluid for 70 h]c. Resistance to Elevated Temperatures in Dry Air [loose parts in 175 °C ± 2 °C (347 °F ± 3.6 °F) air for 22 h]d. Ambient Temperature Stroking Test [tested in brake assembly for 500 000 cycles to 7 MPa ± 0.3 MPa (1000 psi ± 50 psi)]e. High Temperature Stroking Test [tested in brake assembly for 70 h (70 000 strokes) at 120 °C ± 2 °C (248 °F ± 3.6 °F) to 7 MPa ± 0.3 MPa (1000 psi ± 50 psi)]f. Low Temperature Leakage Test [tested in brake assembly for 120 h at –40 to –43 °C (–40 to –45.4 °F)]g. Cycling Humidity Storage Corrosion Test [tested in brake assembly for 14 days at 95% humidity cycling between 21 to 46 °C (69.8 to 114.8 °F)]