BS EN 1439-2008 液化石油气(LPG)设备和附件.LPG瓶灌装前、灌装中和灌装后的检测用程序

标准号：BS EN 1439-2008
中文标准名称：液化石油气(LPG)设备和附件.LPG瓶灌装前、灌装中和灌装后的检测用程序
英文标准名称：LPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling
标准类型：E98
发布日期：2008/3/31 12:00:00
实施日期：2008/3/31 12:00:00
中国标准分类号：E98
国际标准分类号：23.020.30
引用标准：EN 1440;EN 10028-7;EN 12816;EN 13952;EN 14140;EN 14427-2004;EN 14894
适用范围：This European Standard specifies the procedures to be adopted when checking transportable refillable LPGcylinders before, during and after filling.This European Standard applies to transportable refillable LPG cylinders of water capacity from 0,5 l up to andincluding 150 l. This European Standard does not apply to cylinders permanently installed in vehicles, or toplant and filling equipment.This standard is applicable to the following:- welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 andEN 12807 or an equivalent standard);- welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 or an equivalentstandard);- welded aluminium LPG cylinders (see EN 13110 or an equivalent standard);- composite LPG cylinders (see EN 14427 or an equivalent standard).Specific requirements for different types of cylinders are detailed in Annex A, Annex B, Annex C and Annex D.NOTE Rejection limits for a particular type of protected cylinder are given in Annex G.This standard is intended to be applied to cylinders complying with RID/ADR (including pi marked cylinders)and also to existing non RID/ADR cylinder populations.