SAE J 429-2014 外螺纹紧固件的机械和材料要求

标准号：SAE J 429-2014
中文标准名称：外螺纹紧固件的机械和材料要求
英文标准名称：Mechanical and Material Requirements for Externally Threaded Fasteners
标准类型：T31
发布日期：2014/5/7 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T31
国际标准分类号：21.060.10;21.060.20
引用标准：ASME B18.2.1-2012;ASME B18.18-2011;ASTM E 18-2014;ASTM F 606-2013;ASTM F 788/F 788M-2008;ASTM F 1470-2012;ASTM F 2328-2005;SAE J 403-2009;SAE J 404-2009;SAE J 409-1995;SAE J 411-1997;SAE J 417-1983;SAE J 995-2012;SAE J 1268-2010
适用范围：This SAE Standard covers the mechanical and material requirements for inch-series steel bolts, screws, studs, screws for sems , and U-bolts in sizes to 1-1/2 in. inclusive. The term stud as referred to herein applies to a cylindrical rod of moderate length threaded on either one or both ends or throughout its entire length. It does not apply to headed, collared, or similar products which are more closely characterized by requirements shown herein for bolts. The mechanical properties included in Table 1 were compiled at an ambient temperature of approximately 20 °C (68 °F). These properties are valid within a temperature range which depends upon the material