BS EN 60684-3-211-2007 绝缘柔性套管.各种型号套管的规范.收缩比率为2:1的半刚性聚烯烃热缩套管

标准号：BS EN 60684-3-211-2007
中文标准名称：绝缘柔性套管.各种型号套管的规范.收缩比率为2:1的半刚性聚烯烃热缩套管
英文标准名称：Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
标准类型：K15
发布日期：2007/6/29 12:00:00
实施日期：2007/6/29 12:00:00
中国标准分类号：K15
国际标准分类号：29.035.20
引用标准：IEC 60684-1-2003;IEC 60684-2-1997;IEC 60684-2/A1-2003;IEC 60684-2/A2-2005;IEC 60757-1983;ISO 1817-2005
适用范围：This part of IEC 60684 gives the requirements for four types of semi-rigid, heat-shrinkablepolyolefin sleeving with a nominal shrink ratio of 2:1 that has been found suitable fortemperatures up to 135 °C.− Type A: general purpose, flame-retarded, opaque colours;− Type B: general purpose, non flame-retarded, translucent;− Type C: fluid resistant, flame-retarded, opaque colours;− Type D: fluid resistant, non flame-retarded, translucent.The sleeving is normally available in internal diameter sizes up to 12,7 mm as supplied, in thefollowing colours: black, white, red, yellow, blue and translucent.Sizes or colours other than those specifically listed in this standard may be available ascustom items. The items are considered to comply with this standard if they comply withthe property requirements listed in tables 2, 3 and also with the property requirements ofTable 4 for types C and D, excluding dimensions.Materials which conform to this specification meet established levels of performance.However, the selection of a material by a user for a specific application should be based onthe actual requirements necessary for adequate performance in that application and notbased on this specification alone.