DIN EN 13074-2-2011 沥青和沥青粘合剂.从沥青乳胶或缩减或溶剂沥青结合料中回收粘合剂.第2部分:采用蒸发法回收后的稳定性.德文版本EN 13074-2-2011

标准号：DIN EN 13074-2-2011
中文标准名称：沥青和沥青粘合剂.从沥青乳胶或缩减或溶剂沥青结合料中回收粘合剂.第2部分:采用蒸发法回收后的稳定性.德文版本EN 13074-2-2011
英文标准名称：Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation; German version EN 13074-2:2011
标准类型：Q27
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Q27
国际标准分类号：91.100.50
适用范围：This European Standard specifies a method for the stabilisation at 85 °C for 24 h of a binder after recovery from a bituminous emulsion or from a cut-back or fluxed bitumen for further testing. It applies to all types of bituminous emulsions, modified with polymers or non-modified, and as well as to all types of cut-back and fluxed bitumens, both modified with polymers and non-modified. The recovery test method is specified in EN 13074-1. WARNING - The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. The hazards associated with the use of this method have been assessed using cut-back bitumen containing 10 % kerosene and 90 % 160/220 penetration grade bitumen and were found low enough to be acceptable. However it is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.