SAE AMS 4153K-2003 4.5Cu 0.85Si 0.80Mn 0.50Mg(2014-T6)溶解热处理和沉淀热处理的铝合金挤压制品

标准号：SAE AMS 4153K-2003
中文标准名称：4.5Cu 0.85Si 0.80Mn 0.50Mg(2014-T6)溶解热处理和沉淀热处理的铝合金挤压制品
英文标准名称：Aluminum Alloy, Extrusions 4.5Cu 0.85Si 0.80Mn 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
标准类型：V11
发布日期：2003/8/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：V11
国际标准分类号：49.025.20
引用标准：ANSI H 35.2-2003;ANSI H 35.2M-2003;ASTM B 594-2002;ASTM B 660-2002;ASTM B 666/B 666M-2001;SAE AMS 2355G-2002;SAE AMS 2772-1997;SAE ARP 823;SAE ARP 823D-1997;SAE AS 1990-1990
适用范围：This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes and tubing. These products have been used typically for parts requiring good strength and where fabrication does not usually involve welding, but usage is not limited to such applications. Certain design and processing procedures may cause these extrusions to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.