BS EN 13528-2-2002 环境空气质量.测定气体和蒸汽浓缩度的扩散样品.要求和试验方法.特殊要求和试验方法

百检网 2021-08-02
标准号:BS EN 13528-2-2002
中文标准名称:环境空气质量.测定气体和蒸汽浓缩度的扩散样品.要求和试验方法.特殊要求和试验方法
英文标准名称:Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Specific requirements and test methods
标准类型:Z15
发布日期:2002/10/11 12:00:00
实施日期:2002/10/11 12:00:00
中国标准分类号:Z15
国际标准分类号:13.040.20
适用范围:This European Standard specifies specific performance requirements and test methods under prescribedlaboratory and field conditions for diffusive samplers used for the determination of the concentration of gases orvapours in ambient air.Such requirements apply to all diffusive samplers, irrespective of the physical nature of the rate-controlling processand irrespective of the nature of the sorption process and the analytical determination.This standard applies to all stages of the measuring procedure, including transportation and storage of the samplewhere appropriate.This standard applies to measuring procedures with separate sampling and analysis stages, and also to directreadingdevices.This European Standard is applicable to diffusive samplers according to 3.6 of EN 13528-1:2002.This European Standard should enable manufacturers and users of diffusive samplers to adopt a consistentapproach to sampler validation and provide a framework for the assessment of sampler performance againstcriteria specified in EN 13528-1. It is the responsibility of the manufacturer or of those who assemble the diffusivesamplers to ensure that the sampler complies with the data quality objectives given in this European Standard.For the purpose of demonstrating compliance with data quality objectives prescribed for methods to be used insupport of the Council Directive on Ambient Air Quality Assessment and Management, this part of EN 13528provides the relevant requirements and test methods for the determination of measurement uncertainty. Asindicated in 6.5.2 to 6.5.4, some of these procedures are to be undertaken by a single representative laboratory,some by several laboratories in an interlaboratory trial, and some by the laboratory implementing the method. Thisdivision of responsibility is in accordance with Table 1 of CEN Report CR 14377:2002 [3].Where only one laboratory is involved in establishing the performance characteristics of a method, as in amanufacturer’s assessment, the reproducibility elements of the uncertainty budget shall be estimated under withinlaboratoryreproducibility conditions, i.e. by performing the relevant experiments independently, as far asreasonably practicable. This type of assessment is identified as level 2 (see clause 8).This standard can encourage the development of new types of diffusive sampler. Prior to conducting a fullevaluation according to this standard, it would be useful to conduct laboratory or field intercomparisons withestablished samplers. These intercomparisons should be conducted by experienced institutes.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司
相关问答