ANSI/ASTM D635-1998 水平位置自支撑式塑料的燃烧率和/或燃烧程度与燃烧时间测试验方法

标准号：ANSI/ASTM D635-1998
中文标准名称：水平位置自支撑式塑料的燃烧率和/或燃烧程度与燃烧时间测试验方法
英文标准名称：Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position (08.01)
标准类型：G31
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G31
国际标准分类号：83.080.01;13.220.40
适用范围：This fire-test-response test method covers a small-scale laboratory screening procedure for comparing the relative linear rate of burning or extent and time of burning, or both, of plastics in the form of bars, molded or cut from sheets, plates, or panels, and tested in the horizontal position. Note 1This test method, and test method A of IEC 60695-11-10 are technically equivalent. Note 2For additional information on materials which do not burn to the first reference mark by this test, see Test Method D 3801. This test method was developed for polymeric materials used for parts in devices and appliances. The results are intended to serve as a preliminary indication of their acceptability with respect to flammability for a particular application. The final acceptance of the material is dependent upon its use in complete equipment that conforms with the standard applicable to such equipment. The classification system described in is intended for quality assurance and the preselection of component materials for products. This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazards or fire risk assessment of materials, products, or assemblies under actual fire conditions. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see .