BS 7L 37-1989 铝-铜-镁-硅-锰合金的整体冷锻制铆钉用金属线规范(用于溶解处理和自然老化状态)(直径不超过10 mm)(Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)(2-百检网

BS 7L 37-1989 铝-铜-镁-硅-锰合金的整体冷锻制铆钉用金属线规范(用于溶解处理和自然老化状态)(直径不超过10 mm)(Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)(2

百检网 2021-08-02

标准号：BS 7L 37-1989
中文标准名称：铝-铜-镁-硅-锰合金的整体冷锻制铆钉用金属线规范(用于溶解处理和自然老化状态)(直径不超过10 mm)(Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)(2014A)
英文标准名称：Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
标准类型：H61
发布日期：1990/1/31 12:00:00
实施日期：1990/1/31 12:00:00
中国标准分类号：H61
国际标准分类号：49.025.20
适用范围：This British Standard specifies the chemical composition, heat treatment, mechanical properties and the inspection and testing procedures applicable to cold drawn wire of aluminium-copper-magnesium-silicon-manganese alloy supplied in the cold drawn condition for the manufacture of cold-forged solid rivets.NOTE. Rivets manufactured from wire to this standard require solution treatment immediately before installation.