BS 6493-2.3-1987 半导体器件.集成电路.模拟集成电路推荐标准

标准号：BS 6493-2.3-1987
中文标准名称：半导体器件.集成电路.模拟集成电路推荐标准
英文标准名称：Semiconductor devices - Integrated circuits - Recommendations for analogue integrated circuits
标准类型：L56
发布日期：1987/1/30 12:00:00
实施日期：1987/1/30 12:00:00
中国标准分类号：L56
国际标准分类号：31.200
适用范围：British Standard Semiconductor devices National foreword Committees responsible CHAPTER Ⅰ: GENERAL Clause 1. Introductory note 2. Purpose CHAPTER Ⅱ: TERMINOLOGY AND LETTER SYMBOLS 1. General terms 2. Terms related to ratings and characteristics 2.1 Linear amplifiers 2.2 Voltage and current regulators 2.3 Analogue signal switching circuits (under consideration) 3. Letter symbols 3.1 Amplifiers 3.2 Voltage and current regulators 3.3 Analogue signal switching circuits (under consideration) CHAPTER Ⅲ: ESSENTIAL RATINGS AND CHARACTERISTICS Section One —Standard format for the presentation of published data 1. Function 2. Description of circuit 3. Ratings (limiting values) 4. Recommended operating conditions 5. Electrical characteristics 6. Mechanical characteristics and other data 7. Application data Section Two —Operational amplifiers (having two inputs and one output) 1. Function 2. Description of circuit 3. Ratings (limiting values) 4. Recommended operating conditions 5. Electrical characteristics 6. Mechanical characteristics and other data 7. Application data Section Three —Audioamplifiers, videoamplifiers and multichannel amplifiers for telecommunications 1. Function 2. Description of circuit 3. Ratings (limiting values) 4. Recommended operating conditions 5. Electrical characteristics 6. Mechanical characteristics and other data 7. Application data Section Four —R.F. and I.F. amplifiers 1. Function 2. Description of circuit 3. Ratings (limiting values) 4. Recommended operating conditions 5. Electrical characteristics 6. Mechanical characteristics and other data 7. Application data Section Five —Voltage and current regulators 1. Function 2. Description of circuit 3. Ratings (limiting values) 4. Recommended operating conditions 5. Electrical characteristics 6. Mechanical characteristics and other data 7. Application data (under consideration) Section Six —Analogue signal switching circuits General 1. Functional specifications 2. Description of circuit 3. Ratings (limiting values) 4. Recommended operating conditions 5. Electrical characteristics 6. Mechanical characteristics and other data 7. Application data CHAPTER Ⅳ: MEASURING METHODS Section One —General 1. Basic requirements 2. Specific requirements 3. Application matrix Section Two —Linear amplifiers (including operational amplifiers) 1. Specific requirements 2. Power supply currents 3. Small-signal input impedance 4. Output impedance 5. Input offset voltage of a differential-input linear amplifier and bias voltage of a single-ended-input linear amplifier 6. Input offset current 7. Input bias current 8. Input offset voltage temperature coefficient 9. Input offset current temperature coefficient 10. Open-loop voltage amplification 11. Cut-off frequency (frequencies) 12. Common-mode rejection ratio 13. Supply voltage rejection ratio 14. Output voltage range (d.c. measurement only) for differential amplifiers 15. Response times 16. Common-mode input voltage range 17. Short-circuit output current (of an operational amplifier) 18. Cross-talk attenuation (for multiple amplifiers) 19. Upper limiting frequency for full output voltage swing 20. Maximum rate of change of the output voltage (slew rate) 21. Input bias current temperature coefficient 22. Cut-off frequency, unity-gain frequency Section Three —Voltage regulators, excluding two-terminal (single-port) devices 1. Specific requirements 2. Input regulation coefficient and input stabilization coefficient 3. Ripple rejection ratio 4. Load regulation coefficient and load stabilization coefficient 5. Output noise voltage 6. Temperature coefficient of regulated output voltage 7. Stand-by current (quiescent current) 8. Short-circuit current 9. Reference voltage 10. Transient response to changes of input voltage 11. Tran