BS ISO 871-2006 塑料.热空气炉的点燃温度的测定

标准号：BS ISO 871-2006
中文标准名称：塑料.热空气炉的点燃温度的测定
英文标准名称：Plastics - Determination of ignition temperature using a hot-air furnace
标准类型：G30
发布日期：2006/12/29 12:00:00
实施日期：2006/12/29 12:00:00
中国标准分类号：G30
国际标准分类号：13.220.40;83.080.01
适用范围：This International Standard specifies a laboratory method for determining the flash-ignition temperature and spontaneous-ignition temperature of plastics using a hot-air furnace. It is one of a number of methods in use for evaluating the reaction of plastics to the effects of ignition sources. This method does not give a direct measure of the combustibility or rate of a material or any definition of the safe upper limit of temperature for the plastics in use, and it should not be used alone to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire hazard or fire risk assessment which takes into account all of the factors pertinent to an assessment of the fire hazard of a particular end use. Tests made under conditions of this method can be of considerable value in comparing the relative ignition characteristics of different materials. Values obtained represent the lowest ambient air temperature that will cause ignition of the material under the conditions of this test. Test values are expected to rank materials according to ignition susceptibility under actual use conditions.