ISO 14469-3-2006 道路车辆.压缩天然气(CNG)填充连接器.第3部分:25 MPa (250 bar)连接器

标准号：ISO 14469-3-2006
中文标准名称：道路车辆.压缩天然气(CNG)填充连接器.第3部分:25 MPa (250 bar)连接器
英文标准名称：Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 3: 25 MPa (250 bar) connector
标准类型：T13
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T13
国际标准分类号：43.060.40
引用标准：ISO 188;ISO 1817-1985;ISO 9227;ISO 15403;ISO 15501-1
适用范围：1.1 This part of ISO 14469 applies to compressed natural gas (CNG) vehicle nozzles and receptacles hereinafter referred to as devices, constructed entirely of new, unused parts and materials. CNG fuelling connection nozzles consist of the following components, as applicable:a) receptacle and protective cap (mounted on vehicle) (see Clause 7);b) nozzle (see Clause 5).1.2 This part of ISO 14469 applies to devices which have a service pressure of 250 bar, hereinafter referred to as B250 [see 9 a) 3)].This part of ISO 14469 refers only to a service pressure of 250 bar.1.3 This part of ISO 14469 applies to devices with standardized mating components (see 5.8 and 7.7).1.4 This part of ISO 14469 applies to connectors which:1) prevent natural gas vehicles from being fuelled by dispenser stations with service pressures higher than that of the vehicle;2) allow natural gas vehicles to be fuelled by dispenser stations with service pressures equal to or lower than the vehicle fuel system service pressure.1.5 This part of ISO 14469 is applicable to compressed natural gas in accordance with ISO 15403.1.6 All references to pressures (bar) throughout this part of ISO 14469 are to be considered gauge pressures unless otherwise specified.