DIN EN ISO 1179-3-2008 通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第3部分:带定位环(G和H型)O型密封圈密封的轻型(L系列)螺

标准号：DIN EN ISO 1179-3-2008
中文标准名称：通用和液压传动用连接件.带弹性体密封或金属对金属密封的ISO 228-1螺纹的孔口和螺柱端.第3部分:带定位环(G和H型)O型密封圈密封的轻型(L系列)螺柱端
英文标准名称：Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007); Ger
标准类型：J15
发布日期：2008/8/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J15
国际标准分类号：23.100.40
引用标准：ISO 228-1;ISO 3601-3-2005;ISO 4759-1-2000;ISO 5598;ISO 19879
适用范围：This part of ISO 1179 specifies dimensions, performance requirements and test procedures for non-adjustableand adjustable light-duty (L series) stud ends with ISO 228-1 threads with sealing by O-ring with retaining ring(types G and H, respectively).Light-duty (L series) stud ends in accordance with this part of ISO 1179 may be used at working pressures upto 31,5 MPa (315 bar) for non-adjustable stud ends (type G) and up to 20 MPa (200 bar) for adjustable studends (type H). The permissible working pressure depends upon size, materials, design, working conditions,application, etc.Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance.Each manufacturer shall perform testing according to the specification contained in this part of ISO 1179 toassure that components made to this part of ISO 1179 comply with the performance ratings.NOTE I This part of ISO 1179 applies to connectors detailed in ISO 8434-2.NOTE 2 The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for newdesigns in hydraulic and pneumatic fluid power applications.