BS EN ISO 25140-2010 固定污染源排放.利用火焰离子化检测器(FID)测定甲烷浓度的自动化方法

标准号：BS EN ISO 25140-2010
中文标准名称：固定污染源排放.利用火焰离子化检测器(FID)测定甲烷浓度的自动化方法
英文标准名称：Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
标准类型：Z60
发布日期：2010/8/31 12:00:00
实施日期：2010/8/31 12:00:00
中国标准分类号：Z60
国际标准分类号：13.040.40
适用范围：This International Standard specifies the principle, the essential performance criteria, and quality assuranceand quality control procedures for an automatic method for measuring methane in the waste gas of stationarysources using flame ionisation detection. It is applicable to measurements of methane in dry or wet wastegases. The method allows continuous monitoring with permanently installed measuring systems as well asintermittent measurements of methane emissions.NOTE 1 This International Standard is specific to automatic methods for measuring methane in the waste gas ofstationary sources using flame ionisation detection. It supplements the general requirements of other international ornational standards on performance testing, QA/QC procedures, and the test report as specified, for example, inEN 15267-3, EN 14181, and EN 15259.This International Standard does not specify an independent method of measurement.NOTE 2 An independent method of measurement, e.g. to calibrate or validate permanently installed measuringsystems, is specified in ISO 25139.NOTE 3 In EN 14181, “independent method of measurement” is called “standard reference method (SRM)”.