DIN EN ISO 1873-2-2007 塑料.聚丙烯(PP)模塑和挤塑材料.第2部分:试样的制备和性能的测定

标准号：DIN EN ISO 1873-2-2007
中文标准名称：塑料.聚丙烯(PP)模塑和挤塑材料.第2部分:试样的制备和性能的测定
英文标准名称：Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007); English version of DIN EN ISO 1873-2:2007-11
标准类型：G33
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G33
国际标准分类号：83.080.20
引用标准：ISO 62;ISO 75-2;ISO 178;ISO 179-1;ISO 179-2;ISO 293;ISO 294-1;ISO 294-3;ISO 294-4;ISO 527-2;ISO 899-1;ISO 1133-2005;ISO 1183-1;ISO 1183-2;ISO 1183-3;ISO 1628-3;ISO 2818;ISO 3167;ISO 4589-2;ISO 6603-2;ISO 8256;ISO 10350-1;ISO 11357-2;ISO 11357-3;ISO 11359-
适用范围：This part of ISO 1873 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PP moulding and extrusion materials.Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are given.Properties and test methods which are suitable and necessary to characterize PP moulding and extrusion materials are listed.The properties have been selected from the general test methods in ISO 10350-1.Other test methods in wide use for,or of particular significance to,these moulding and extrusion materials are also included in this part of ISO 1873,as are the disignatory properties specified in Part 1.In order to obtain reproducible and comparable test results,it is necessary to use the methods of preparation and conditioning,the specimen dimensions and the test procedures specified herein.Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.