UL 61010-031-2007 测量、控制和实验室用电气设备的安全要求.第031部分:电气测量和试验用手持式探头组件的安全要求

标准号：UL 61010-031-2007
中文标准名称：测量、控制和实验室用电气设备的安全要求.第031部分:电气测量和试验用手持式探头组件的安全要求
英文标准名称：Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
标准类型：K60
发布日期：2007/3/30 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：K60
国际标准分类号：13.260;17.220.20
适用范围：The document specifies safety requirements for probe assemblies for (electrical) measurement and test. It applies to hand-held and hand-manipulated probe assemblies of the types described below, and related accessories which are intended for professional, industrial process, and educational use. These probe assemblies are for use in the interface between an electrical phenomenon and test or measurement equipment. They may be fixed to the equipment or be detachable accessories for the equipment. a) Low-voltage and high-voltage, non-attenuating probe assemblies (type A). Non-attenuating probe assemblies that are rated for direct connection to voltages exceeding 33 V r.m.s. or 46,7 V peak or 70 V d.c., but not exceeding 63 kV. They do not incorporate active components, nor are they intended to provide a voltage divider function or a signal conditioning function, but they may contain passive non-attenuating components such as fuses. b) High-voltage attenuating or divider probe assemblies (type B). Attenuating or divider probe assemblies that are rated for direct connection to secondary voltages exceeding 1 kV but not exceeding 63 kV. The divider function may be carried out wholly within the probe assemblies, or partly within the test or measurement equipment to be used with the probe assemblies. c) Low-voltage attenuating or divider probe assemblies (type C). Attenuating, divider or other signal conditioning probe assemblies for direct connection to voltages exceeding 33 V r.m.s or 46,7 V peak or 70 V d.c., but not exceeding 1 kV r.m.s. or 1,5 kV d.c. The signal conditioning function may be carried out wholly within the probe assemblies, or partly within the test or measurement equipment intended to be used with the probe assemblies. This standard does not cover a) reliable function, performance or other properties of the probe assembly; b) effectiveness of transport packaging; c) servicing (repair); d) protection of servicing (repair) personnel.