BS EN 10290-2002 岸上和近海输油管用钢管和配件.用于外部液体的聚氨酯和改性聚氨酯脂涂层

标准号：BS EN 10290-2002
中文标准名称：岸上和近海输油管用钢管和配件.用于外部液体的聚氨酯和改性聚氨酯脂涂层
英文标准名称：Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
标准类型：E98;H48
发布日期：2002/9/19 12:00:00
实施日期：2002/9/19 12:00:00
中国标准分类号：E98;H48
国际标准分类号：23.040.99;25.220.60
适用范围：This European Standard specifies the requirements of liquid applied external coating, polyurethane (PUR) and polyurethane-modified (PUR-MOD), for the corrosion protection of tubes and pipeline fittings. The coating in this standard can be applied to longitudinally or spirally welded and to seamless steel tubes and fittings used for the construction of pipelines for conveying liquids or gases. In accordance with the elongation properties, if the component has to be cold bent the coating shall be applied after bending unless otherwise approved by the purchaser. The coating shall consist normally of one layer of liquid product, applied by brush or by an airless spray technique. Other application methods can be recommended by the product manufacturer, in accordance with the kind of product (spatula, injection, spreading, etc.). This coating can be used for the protection of buried or submerged steel tubes for service at the following temperatures and with two thickness classes A (1 000 μm) and B (1 500 μm) based on the following combination. Lower thickness can be agreed between the coating manufacturer and the purchaser. — type 1 : -20 ℃ to 40 ℃, thickness class A or B — type 2 : - 20 ℃ to 60 ℃, thickness class B — type 3 : - 20 ℃ to 80 ℃, thickness class B Other temperatures can be agreed; in this case, tests shall be carried out at the required temperature. In this standard the word components is used for tubes and fittings. Frequencies of tests on fittings shall be agreed by the parties at the ordering stage. Components coated with these types of coatings may be further protected by means of cathodic protection.